Hand-held hoover & electric dust blower incl. F7 filter for coarse blowing out of the evaporator fins and for vacuuming dirt in the heat pump outdoor unit or cleaning the electronics. A protective brush attachment that is gentle on the fins is included for vacuuming the fins.With battery operation Battery capacity: 27.75Wh, 5V/2A
Outlet pressure: 15 Kpa (0.15 bar)
Special brush for cleaning the condensation water in the heat pump evaporator and hard-to-reach areas inside the outdoor unit and the electronic parts.Length: 22.5 cm Bristle width: 3.5 cm
For straightening damaged or bent fins on the evaporator. Also suitable for hard-to-reach areas.This spanner comb can repair the bent fins so that the evaporator can work at maximum efficiency. Material: Plastic (high temperature resistant) Fin spacing: 8-9-10-11-12-13-14-15-16-17-18-20 fins per inchorange: 12/14 blue: 9/15
yellow: 16/17
yellow green: 18/20
mint green: 11/13
wine red: 8/10
Large metal comb with sturdy red PVC handle for straightening and cleaning evaporator fins and air conditioning systems. Length: 20 cm
Brush Width: 4 cm
for storing small parts such as screws etc. during maintenance work Sturdy magnetic storage tray with two magnets for storing screws, washers and small parts during maintenance and service work. W 11.3 cm x H 9 cm Compartment size: W 7.5 cm x D 4.7 cm x H 2.3 cm
Cleaning gun with lance attachment for flushing the heat exchanger (spare part from heat exchanger universal cleaning box Art. 867) When using the cleaning gun, make sure that all connections are 100% tight and that nothing is dripping. In addition, all live parts must be switched off and completely covered against water ingress and moisture. The handle should be operated very slowly and carefully, as spraying may occur when filling the hose (air/water). After each (even brief) use, the water must be switched off and secured against unintentional restarting.
Craftsman protective screen set Dimensions: Height: 1.14 m ⌀ when closed: 13 cm ⌀ when open: 1.30 m Stay in the shade on scorching roofs and keep tools dry during rain repairs. Provides shade when the sun is shining and keeps you dry during rain showers. Includes lanyard to secure the sunshade. Features: Umbrella includes magnetic base and lanyard with carabiner.
The base can be swivelled and locked.
Robust earth magnet can be securely attached to any metal housing. Attention: Not available to UK, USA, Switzerland
Maintenance tools for cleaning and servicing air and water heat pumps and air conditioning systems. Scope of delivery: 2 heat pump and air conditioning system cleaners in 0.5 l bottlesSpray lance
Flammable cold spray 100 ml Leak detection spray 125 ml Heat pump and air conditioning finned brush Heat pump fin comb (for narrow areas) Heat pump fin comb (with sturdy red PVC handle) Heat pump fin comb (12 spacing) Heat pump cleaning brush with wooden handle for condensate water Storage compartment on magnetic plate Inspection stickers (12 stickers) metaBOX 145S system case with foam insert