Cleaning knife for Bosch/Junkers heat exchangers
From
€19.90
excl. VAT
With wooden handle for manual servicing for appliance series WB 5 without coating
Cleaning spatula
€29.90
excl. VAT
For cleaning stainless steel heat exchanger blocksHandle + blade (serrated) 0.4 mm
Cleaning spatula is used to remove combustion residues & dirt in the burner chamber of the heat exchanger. Ideal for use during annual maintenance to prevent damage to the heat exchanger caused by soiling.
Extension for nylon disk brush hexagonal
€16.90
excl. VAT
Attention: New version with hexagonal holder! Only compatible with new nylon disc brush (Art. 878)! Extension (30 cm) for drill. We recommend a maximum speed of 1,500 to 2,000 revolutions and the use of protective goggles and a mask, as harmful fine dust can be generated at higher speeds. The nylon disc brush is suitable for stainless steel and aluminum heat exchangers. Simultaneous vacuuming of the dust is recommended.Note: Nylon disc brush not included in scope of delivery.
Flammable cold spray 100ml
€9.45
excl. VAT
Checking heat pump temperature sensors in the refrigeration sector.
Handheld vacuum blower 2in1
€119.00
excl. VAT
Hand-held hoover & electric dust blower incl. F7 filter for coarse blowing out of the evaporator fins and for vacuuming dirt in the heat pump outdoor unit or cleaning the electronics. A protective brush attachment that is gentle on the fins is included for vacuuming the fins.With battery operation Battery capacity: 27.75Wh, 5V/2A
Outlet pressure: 15 Kpa (0.15 bar)
Heat exchanger cleaning kit in case
€89.30
excl. VAT
for cleaning stainless steel heat exchanger blocks Heat exchanger cleaning spatula service set consisting of: 1 heat exchanger cleaning spatula with sturdy wooden handle and claw spatula for heavy soiling.
Material: V2a, stainless steel, thickness: 0.4 mm
Incl. 2 additional replacement blades 1 Heat exchanger cleaning scraper with sturdy wooden handle and rounded blade scraper for standard deposits on the heat exchanger.
Material: V2A, stainless steel, thickness: 0.4 mm
Incl. 2 additional replacement blades Case with foam insert
Heat exchanger universal cleaning box in metaBox
€259.00
excl. VAT
For cleaning stainless steel heat exchanger coilsHeat exchanger cleaning service set consisting of: 1 special cleaning brush 1 Starlock blade (rounded - 0.4 mm) 1 Starlock blade (serrated - 0.4 mm) 1 heat exchanger cleaning spatula with rounded attachment 0.4 mm (material: V2a, stainless steel) 1 heat exchanger cleaning spatula with serrated attachment 0.4 mm (material: V2a, stainless steel)1 cleaning gun with lance attachment for flushing the HEX3 pcs of steel-free cleaning fleece1 nylon brush with extensionmetaBox M118S with foam insert
Heat pump and air conditioning cleaner
€15.90
excl. VAT
0.5 litre special cleaner for heat pump fins
Heat pump and air conditioning finned brush
€10.50
excl. VAT
White PVC handle with brown soft cleaning bristles for cleaning evaporator fins and air conditioning systems.Length: 18 cm
Brush width: 7.5 cm
Heat pump cleaning brush with wooden handle
€15.50
excl. VAT
Special brush for cleaning the condensation water in the heat pump evaporator and hard-to-reach areas inside the outdoor unit and the electronic parts.Length: 22.5 cm Bristle width: 3.5 cm
Heat pump fin comb (6 distances)
€14.90
excl. VAT
With PVC handle in red. For straightening damaged or bent fins on the evaporator.
Fin spacing 8-9-10-12-14-15 fins per inch.
Heat pump finned spanner comb
€25.50
excl. VAT
For straightening damaged or bent fins on the evaporator. Also suitable for hard-to-reach areas.This spanner comb can repair the bent fins so that the evaporator can work at maximum efficiency. Material: Plastic (high temperature resistant) Fin spacing: 8-9-10-11-12-13-14-15-16-17-18-20 fins per inchorange: 12/14 blue: 9/15
yellow: 16/17
yellow green: 18/20
mint green: 11/13
wine red: 8/10
Heat pumps Finned comb
€34.50
excl. VAT
Large metal comb with sturdy red PVC handle for straightening and cleaning evaporator fins and air conditioning systems. Length: 20 cm
Brush Width: 4 cm
Heat pumps Flossenkamm
€15.75
excl. VAT
Small metal comb for straightening and cleaning evaporator fins and air conditioning systems. Length: 14.5 cm
Brush width: 2.5 cm
HEPA filter for 2in1 handheld vacuum fan
€9.50
excl. VAT
Replacement filter for Art. 657 Handheld vacuum fan 2in1
HEX cleaning blade Starlock
From
€32.90
excl. VAT
For cleaning stubborn dirt from stainless steel heat exchanger blocks Original Starlock adapter for standard oscillators, angle: 90 degrees, 0.4 mm thick, stainless steel blade V2a suitable for all Starlock attachments (Fein, Bosch, Makita, etc.). Working with Starlock adapters ensures quick and efficient cleaning of heat exchangers with stubborn dirt. Protected by design protection at the EUIPO (European Union Intellectual Property Office)
No: 015013680
HEX cleaning blade Starlock (set of 3)
€84.90
excl. VAT
For cleaning stainless steel heat exchanger blocks 3 original Starlock adapters for standard oscillators, angle: 90 degrees, 0.4 mm thick, stainless steel blade V2a suitable for all Starlock attachments (Fein, Bosch, Makita, etc.). Working with Starlock adapters ensures quick and efficient cleaning of heat exchangers with stubborn dirt. Protected by design protection at the EUIPO (European Union Intellectual Property Office)
No: 015013680
HEX cleaning spatula set for plastics
€39.90
excl. VAT
1 cleaning spatula with sturdy wooden handle and 105° angle. Incl. stainless steel holder, shim for the plastic blade (1.4031), serrated special plastic blade, high temperature resistance (resistant up to approx. 180°C)
Includes spare blade box with 6 blades. Suitable for Vaillant heat exchangers.
HEX Universal cleaning set in L-BOXX
€335.00
excl. VAT
System case L-Boxx 136 with tools for cleaning heat exchangers from Vaillant, Brötje, Remeha, Viessmann, ElcoHeat exchanger cleaning service set consisting of:1 special cleaning brush 1 Starlock blade (smooth - 0.4 mm) 1 Starlock blade (serrated - 0.4 mm) 1 heat exchanger cleaning spatula with serrated attachment Inox 0.4 mm 1 heat exchanger cleaning spatula with serrated plastic attachment 0.5 mm 1 tin with 6 serrated replacement blades made of plastic 0.5 mm and 2 serrated replacement blades made of stainless steel 0.4 mm 1 cleaning gun with 2 different lance attachments for flushing the heat exchanger (45 degrees for e.g. Vaillant, Viessmann, Brötje and 90 degrees for e.g. Bosch, Buderus) 1 nylon disk brush incl. extension 30 cm 1 rear wall protection Ø190mm (f. e.g. Vaillant and Brötje) 1 Leak stopper standard yellow (gas pipe stopper) 1 Flexible cleaning brush (siphon) Steel-free cleaning fleece (3 pcs.) Inspection stickers (12 stickers) L-BOXX 136
Lance 25 cm (attachment)
€13.90
excl. VAT
Please note: This is only the extension attachment for the "spray lance" cleaning gun. Angled 90°, compatible with "spray lance" cleaning gun
for maintenance work on combustion chambers in hard-to-reach areas
Magnetic storage compartment (large)
€29.90
excl. VAT
for storing small parts such as screws etc. during maintenance work Sturdy magnetic storage tray with two magnets for storing screws, washers and small parts during maintenance and service work. W 11.3 cm x H 9 cm Compartment size: W 7.5 cm x D 4.7 cm x H 2.3 cm